This turbo DO NOT FOR audi A3 2.0 2008- Can Not replace bv43 type

 FOR VW Passat  140HP 2.0L BKD/AVZ/ BKP ENGINE , DO NOT FIT for VW Passat  140HP 2.0L  BMP / BMM ENGINE

Application:

This turbo DO NOT FOR audi A3 2.0 2008- Can Not replace bv43 type

FOR VW Passat  140HP 2.0L BKD/AVZ/ BKP ENGINE , DO NOT FIT for VW Passat  140HP 2.0L  BMP / BMM ENGINE

1. For Audi A3 140HP 103KW 2.0T DI BKD/AZV 2003-2008

2. For Seat Altea 136hp 100kw 2.0T DI BKD/AZV 2004-2007

3. For Seat Leon 136hp 100kw 2.0T DI BKD/AZV 2005-2007

4. For Seat Toledo III 136hp 100kw 2.0T DI BKD/AZV 2004-2007

5. For Skoda Octavia II 136hp 100kw 2.0T DI BKD/AZV 2004

6. For VW golf 136hp 100kw 2.0T DI BKD/AZV 2003-2009

7. For VW Passat B6 140hp 103kw 2.0T DI BKP 2005-2008

8. For VW Passat B6 136hp 100kw 2.0T DI BKD/AZV 2005-2008

9. For VW Touran 136hp 100kw 2.0T DI BKD/AZV 2003-

Reference OE/OEM Number:

724930 ,724930-0002 , 724930-0004 , 724930-0006 , 724930-0008，724930-0009 , 724930-0010 , 724930-0012 , 

724930-5002S , 724930-5004S , 724930-5006S , 724930-5008S，724930-5009S , 724930-5010S , 724930-5012S ,

724930-2，724930-4，724930-6，724930-8，724930-9，724930-10

03G253019A , 03G253019AV , 03G253019AX , 03G253019AV550，

03G253010J ,   03G253010JV , 03G253010JX , 

03G253014H , 03G253014HX，03G253014HV , 

Turbo Model：GT1749V，Not for BV43 Type

Engine Code：BKD/AZV/ BKP

Cooling Type: Oil Cooling

Bearing Type: Journal Bearing / Floating Bearing

Thrust bearings: 270 Degrees

Hosepower:  136hp,140hp

Condition: Brand New

Warranty: 2 years warranty for any manufacturing defect

Accessories: You will receive the parts exactly as shown in the picture above.

Product Material：

1. Turbine housing ：Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius

2. Steel Turbine Wheel：Made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius

3. Compressor housing：ZL104 aluminum with lightweight 

4. compressor wheel/blades：Cast aluminium with good gas tightness and corrosion 

resistance

Product  Performance：

1. OEM-quality and size with little modification

2. Rich Experience In Turbo Production And Own Factory

3. Quality Assurance

4. High Performance Rotor

5. High-Speed Oil Seal Ring

6. Strict Quality Inspection

7. Precision Clearance

8. High-speed Accessories

Features:

1. 100% balancing Test by TURBOTECHNICS  VSR3

This Turbocharger you will receive has been balanced using the VSR machine technology. Through the comprehensive and high-precision static and dynamic balance detection technology, and reliability.

2. G3-min-Flow VNT Turbo testing

The G3-min-Flow (Air) was designed and built in the UK by 3 former Test Engineers whom have a combined total of 60 years in the Industry.  the machine can accurately measure the flow through the VGT turbo and verify that it is set to the OEM factory setting. easily adjust the critical minimum-flow stop to the correct setting before the turbocharger leaves workshop.

3.  Advanced Actuator Tester/Programmer：

electronic actuator diagnostic with G3-rea-master can rewrite memory in electronic actuators and also allows to modify operation range of the actuator arm, that includes changing open and close positions of the working angle.

Notice

*Please check the Turbo Model, Turbo Part Number and OEM Part Number on your original Turbo to make sure this turbo is the correct one for your engine. If you need assistance finding the correct turbo for your car, please feel free to contact us.

*Professional installation is highly recommended (No Instructions are Included)